Cabin Compact Wardrobe
Single bay, 600 to 900 mm, properly built
Most narrow wardrobes are made from 15 mm particle board with a paper wrap, and they sag within two years because nobody engineers a cheap product. This is the same 38 mm anodised extrusion as the 1800 mm three-door, cut short. It costs more than the flat-pack alternative and it is still standing when that one is at the recycling centre. At 600 mm it goes into an alcove beside a chimney breast or a wardrobe recess; at 900 mm it is a genuine single wardrobe.
S$890
no GST charged- Dispatched in 3–5 working days. Free delivery over S$1,200.
- About 25 minutes to assemble for two people, or add assembly for S$120 per order.
- 5-year warranty · 30-day returns
What you get
- Fits a 600 mm alcove with 5 mm either side to spare
- Single door, hinged left or right — decided at assembly, not at order
- Full hanging rail plus three shelves
- Light enough for one person to carry each carton up stairs
- Anti-tip bracket included — essential at this width
Specification
- Frame
- Extruded 6063-T5 aluminium, 38 mm section, anodised — not painted steel
- Panels
- Cast acrylic panels, 5 mm, polished edges, UV-stable
- Hinges
- Concealed soft-close hinges, 165°, adjustable in three planes
- Hinge side
- Reversible at assembly
- Rail
- 25 mm oval aluminium, 40 kg rated
- Packed
- One carton, flat-packed
- Selected size
- 600 × 550 × 1800 mm
- Hanging rail
- 560 mm
- Assembled weight
- 31 kg
About the Cabin
Can the door open from the other side?
Yes. The frame is drilled for both, and you choose the hinge side while you are assembling it — there is nothing to specify at order and nothing to send back if you change your mind later. Reversing it afterwards takes about ten minutes and the two blanking caps you will find in the fittings bag.
Is 550 mm deep enough?
For most clothing, yes: 550 mm external gives about 510 mm inside, which hangs a shirt or a dress square. A bulky winter coat on a wide wooden hanger will brush the door. If you mostly store outerwear, take the 600 mm-deep Vitrine instead — this one is dimensioned for the rooms where 600 mm does not fit.
Goes with it
Everything clamps to the same 32 mm pitch
Nothing here needs drilling, and all of it comes out again without a mark — so a wardrobe can be reconfigured years later or stripped back before it moves house.
Soft-Close Drawer Module
Three drawers, drops into any bay
A three-drawer module on full-extension runners that drops into a Vitrine, Meridian or Openwork bay and clamps to the uprights. No tools beyond the supplied key, and it comes out again just as easily.
600–900 mm wide
From S$330
LED Rail with Motion Sensor
Light that comes on when the door does
A slim LED strip that clips into the top rail channel and lights the bay when the door opens. Runs off a rechargeable cell, so there is no wiring and no electrician.
500–1500 mm wide
From S$120
Pull-Out Trouser Rail
Twelve pairs, in the depth of one
A full-extension pull-out rail with twelve non-slip arms, for trousers hung at the fold rather than folded over a hanger. Clamps to the frame on the same pitch as the shelves.
12 arms, 500 mm extension
From S$180